Click to enlarge
MCC DB
MCC DB
Back to products
Ladder Type Cable Tray
Ladder Type Cable Tray

Medium Voltage Switchgear

Medium voltage switchgear is a type of electrical equipment that is used to control and protect medium voltage circuits, typically in the range of 2.4kV to 38kV. The switchgear can have different functionalities depending on the specific type and design, but generally the functionality includes:

Compare
Add to wishlist
Category: Brand:
Description

Description

  1. Isolation: The switchgear is used to isolate a section of the electrical system for maintenance, testing, or troubleshooting purposes.
  2. Switching: It allows the operator to switch on or off the power supply to different sections of the electrical system.
  3. Protection: The switchgear includes protection devices such as fuses and circuit breakers that can detect and interrupt a fault in the electrical system before it causes damage.
  4. Monitoring: It includes devices such as meters and sensors that can monitor the current, voltage, and power factor of the electrical system.
  5. Control: The switchgear can be controlled and operated remotely or locally, and it can be integrated with other control systems for a better management and supervision.
  6. Arc flash protection: It provides protection to the operator from the hazards of an arc flash event.
  7. Grounding: It allows the operator to ground the system in case of a fault.
  8. Earthing: It makes sure that the equipment is properly earthed and is safe to operate.
  9. Insulation: It provides insulation to the equipment and ensures that there is no leakage of current.
  10. Safety: It ensures that the equipment is safe to operate and that it complies with the relevant safety regulations.
Enclosure Details

Enclosure Details

Our panels and distribution board comply with standard IEC 60439-1, DIN VDE 0660 1.500 SECTION 8.3 and all their mechanical and operating characteristics expressed in accordance to the standard.

STRUCTURE

  • Our panels structures are constructed using the MS sheet, with Front Door (optional back Door), Side & Back Covers.
  • Our enclosure system has complete modularity in 2 AXES. This provides the most flexible solution possible Height, 1‘idth, and Depth as well as sizing and placement of any sub-section are infinitely variable.
  • Enclosure corner. frame and Door constructed of 2mm thick Ms Sheet.
  • Apparatus Mounting plate constructed of 1.6mm thick Ms Sheet.
  • Apparatus safety covers constructed of 1.8mm thick Ms Sheet.
Paint Specifications

Paint Specifications

Panel having an electrostatic epoxy powder coated texture finishing to (RAL-7032 & 7035) or a wide

Choice of colors upon Client request.

  • Type Epoxy polyester powder
  • Coating Thickness 60-80 pm
  • Staved at 180 to 200°C
  • Gloss level Semi gloss 40 to 60%

Decree of protection

External cladding and doors all come with a sealing gasket ensuring the above mentioned standard. minimum IP class-42 and (IP 56 Obtainable) according to standard IEC -60529.

Internal Separation

Internal protection of our system is achieved using Form 1 to Form 4B type. The compartments are efficiently protected against Arcing. The incoming feed unit and the main bus bars are separated, the main & distribution bus ducts are separated from one another and also from other compartment.

Save Work Environment

Save Work Environment

  • Adequate lighting: There should be good lighting to allow workers to clearly see the equipment and wiring.
  • Ventilation: Adequate ventilation is necessary to prevent the buildup of hazardous fumes and dust.
  • Accessibility: The electrical panel should be located in an area that is easily accessible to maintenance workers and electricians.
  • Safety equipment: Workers should have access to appropriate personal protective equipment (PPE) such as gloves, safety glasses, and hard hats.
  • Organization: The electrical panel should be organized in a manner that allows workers to easily identify and access equipment and wiring.
  • Grounding: Proper grounding is necessary to protect workers from electrical shock and to protect equipment from damage.
  • Space: There should be sufficient space for workers to safely move around the electrical panel and perform maintenance and repair tasks.
  • In summary, the work environment for electrical panel work should prioritize safe